Power Supplies

G3 Series

• Miniature size, non-PFC
• High reliability, 5G vibration, 70? operation
• 300VAC input surge, all using 105?capacitors
• Suitable for critical applications
• 2 outputs are isolated for RID series

NE Series

• Economical non-PFC models
• Miniature size with complete protections
• Most economical models with complete safety certificates

SE Series

• Non-PFC, complete protections
• Economical medium to high power models with safety certificate

PFC Series

• Built-in active PFC function
• Full range input, complete functions

Moving Sign

• Built-in active PFC function
• Output voltage:
    2.5V, 3.6V, 3.8V, 5V for HSP series
    2.8V / 3.8V for HDP series
• Suitabel for high efficiency moving sign appication
• Conformal coating

SPV Series

• Output voltage programmable from 20~110%

U-Bracket

• 1U low profile
• Built-in active PFC
• Fanless design

RSP Series

• Low profile with PFC function
• With complete functions for 750W~ 3000W
• Built-in parallel function for 1000W~3000W

G5 Series

• Built-in active PFC function
• High efficiency, no load power consumption <0.5W
• 5 years warranty

MSP Series

• Medical enclosed type, built-in active PFC
• Medical safety approved (MOOP level)
• High efficiency, no load power consumption <0.5W
• 5 years warranty

CEN Series

• 90~295VAC input, built-in active PFC function
• Metal case, IP66 design for indoor and outdoor installations
• User adjustable output voltage and current level
• Suitable for LED street lighting and outdoor LED lighting applications

CLG Series

• 90~295VAC input, built-in active PFC function
• Metal case, IP67/IP65 Design for indoor and outdoor installations
• Output current adjustable through output cable or internal potentiometer (CLG-150)
• Suitable for LED street lighting, outdoor LED lighting and moving sign applications

HLG Series

• 90~305VAC input, built-in active PFC function
• 95% high efficiency
• Metal case, IP67/IP65 Design for indoor or outdoor installations
• Built-in 3 in 1 dimming function (1~10VDC, PWM signal or resistance) for B type
• Suitable for LED street lighting, outdoor LED lighting and   moving sign applications
• 5 years warranty

HLG-C Series

• 90~305VAC input, built-in active PFC function
• Constant current output with high output voltage >60VDC
• Metal case, IP67/IP65 Design for indoor or outdoor installations
• Built-in 3 in 1 dimming function
    (1~10VDC, PWM signal or resistance) for B type
• Suitable for LED street lighting and outdoor LED lighting
• 5 years warranty

HVG(C) Series

• Wide input range 180~480VAC for HVG(C)-100,
    180~528VAC for HVG(C)-150
• Constant current output with high output voltage >60VDC for HVGC series
• Metal case, IP67/IP65 Design for indoor or outdoor installations
• Built-in active PFC function
• Suitable for LED street lighting and outdoor LED lighting
    applications
• 5 years warranty

HSG Series

• 90~305VAC input, built-in active PFC function
• Rectangular metal case
• IP65 design for indoor and outdoor installations

ULP-150

• 90~295VAC input, built-in active PFC function
• High efficiency up to 93%
• U-bracket low profile: 33mm, suitable for built-in LED lighting systems

LDV Series

• 180~295VAC input, built-in active PFC function
• 6CH/700mA or 12CH/350mA constant current output

AP Series

• Rectangular plastic case with IP30 level
• Low cost
• Constant voltage design (C.V. mode) for APV series
• Constant current design (C.C. mode) for APC series
• Suitable for indoor LED lighting

LP Series

• Slim plastic case with IP67 level
• Economical Design, low cost
• Withstand 300VAC surge input for 5 seconds
• -30~70? wide operation range
• Suitable for economical LED lighting and moving sign applications

ELN Series

• Fully isolated plastic case with IP64 level
• Optional Dimming function: 1.1~10VDC(D type) or type) controlled
• Class 2 power unit
• Suitable for economical LED lighting and moving sign applications

PCD Series

• AC phase-cut dimming, work with leading and trailing edge plastic case with IP30 level
• Built-in active PFC function
• Class II design, without FG
• Suitable for indoor LED lighting

PLD Series

• Fully isolated plastic case with IP30 level
• Built-in active PFC function
• Class II design, without FG
• Suitable for indoor LED lighting

LPF Series

• Fully isolated plastic case with IP67 level (16W optional)
• Class II design, without FG
• Built-in active PFC function
• Built-in 3 in 1 dimming function
    (1~10VDC, PWM signal or resistance) for LPF-xxD
• Suitable for LED lighting and moving sign applications

PLC Series

• Fully isolated plastic case with screw terminal style of I/O
• Built-in active PFC function
• Suitable for indoor LED lighting and moving sign applications

PLN Series

• Fully isolated plastic case with IP64 level
• Built-in active PFC function
• Class 2 power unit
• Suitable for indoor LED lighting and moving sign applications

HLN Series

• Fully isolated plastic case with IP64 level
• Built-in active PFC function
• Built-in 3 in 1 dimming function
    (1~10VDC, PWM signal or resistance) for B type
• Class 2 power unit
• User adjustable output voltage and current level for A type
• Suitable for indoor LED lighting and moving sign applications

LCM Series

• 180~295VAC input, built-in active PFC function
• Fully isolated plastic case
• Multiple-stage C.C. level selectable by DIP S.W.
• Built-in 0~10VDC and PWM signal dimming function for LCM-40/60
• Built-in DALI interface and push dimming function for LCM-40DA/60DA
• Suitable for indoor LED lighting applicaions

PLP Series

• Built-in active PFC function
• Suitable for built-in LED lighting systems

HLP Series

• Built-in active PFC function
• Built-in 3 in 1 dimming function
    (1~10VDC, PWM signal or resistance)
• Suitable for built-in LED lighting systems

LDD Series

• Constant current output DC/DC LED driver
• High efficiency up to 97%
• Comply with EN55015 and FCC without additional any components
• Built-in PWM dimming and remote ON/OFF control
• Suitable for built-in LED lighting systems
    (Additional mother board is required)
• Pin and wired style for choice

SPD-20

• 20kA surge protection device
• Type 2 component assemblies
• Line to Ground & Line to Line protected
• Suitable for surge protection of LED drivers
• Design refer to UL1449, TUV EN61643-11

MDR series

• No load power consumption <0.75W (1W for MDR-100)
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in active PFC and over temperature protection (MDR-100)
• DC OK signal output (MDR-10/20)
• DC OK relay contact (MDR-40/60/100)

Class II Type / Step Shape

• Isolation class II
• No load power consumption <0.5W (DR-15)
• No load power consumption <1W (DR-100)
• Assemble on industrial rail TS35 / 7.5 or 15
• Suitable for building automation and control of household appliance

General Type — Single Phase

• Fanless design
• Models over 240W(includes) built-in PFC function

General Type — Three Phase or High Input Range

• Fanless design
• Three phase or high input voltage range (340~550VAC)

SDR Series — Slim Single Phase

• Slim design and high efficiency up to 94%
• Built-in active PFC function
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact
• 150% peak load capability (130% for SDR-960)

TDR Series — Slim Three Phase

• Slim design and 340~550VAC high input range (three phase)
• High efficiency up to 94.5%
• Built-in active PFC function
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact

WDR Series — Slim Wide Input Range

• Slim design and 180~550VAC wide input range (single and two phase)
• High efficiency up to 93%
• Built-in active PFC function (240W & 480W)
• Assemble on industrial rail TS35 / 7.5 or 15
• Built-in DC OK relay contact

Peripheral

• 20A redundant module & 40A DC UPS module

• Free configuration, highly flexible, customized standard PSU
• Cover all output voltages from 1.6~53VDC
• Built-in active PFC
• Suitable for multi-output, complex equipment or systems

• 19", 1U rack power unit
• RCP-MU / RKP-CMU1: Control and monitoring unit
   (Built-in I²C / PMBus decoder)

Security Series

• With UPS function (need external batteries)
• Suitable for security industry or battery backup systems
• PCB type: PSC series (case available)

ATX PC Power

• General SPEC for ATX PCs with competitive low costs
• IPC seires with 1U/2U size and higher reliability suitable for industrial PC applications

On Board Type

• Assemble on the main PCB of the system
• Medical safety approved (MOPP level)
• NFM — PCB type / PM — module type

General PCB Type

• PCB type, non-PFC for small wattage models
• Multiple form factors for Different installations:
    7"* 4.25", 5"* 3", 4"* 2", slim type

Green PCB Type

• Compact PCB type, non-PFC for small wattage models
• No load power consumption <0.3W or 0.5W
• Suitable for ErP regulated end systems

Medical PCB Type

• PCB type, non-PFC for small wattage models
• Medical safety approved (MOPP level)
• Low leakage current suitable for non-patient contact medical equipments

Adaptor — Desktop

• Desktop style with safety certificates for main countries
• Need suitable power cord for Different areas
• DC plug changeable (MOQ may be required)
• ErP step 2 compliant and meet EISA 2007 for GS series
• Triple output: P25/50

Adaptor — Wall-mounted

• Wall-mounted style adaptor with safety certificates
• DC plug changeable (MOQ may be required)
• ErP step 2 compliant and meet EISA 2007
• Interchangeable type for GE series

Adaptor — Medical

• Desktop style with medical safety approved (MOPP level)
• Need suitable power cord for Different areas
• DC plug changeable (MOQ may be required)

Module Type

• On board module type, assemble on the main PCB of the system
• Single, dual, triple output models

On Board Type

• On board PCB type, assemble on the main PCB of the system
• Ultra-low profile
• 3:1 ~ 4:1 wide input range
• Non-isolated for NID series

PCB Type

• 2:1 wide input range
• CE declaration
• Built-in systems and low cost

Enclosed Type

• DC/DC converter with metal chassis
• Comply with EN50155 railway certificate for RSD family
• CE declaration
• Suitable for battery backup system or transportation vehicle

Modified Sine Wave

• External DC/AC inverter
• Modified sine wave output, suitable for resistive load
• Low cost

True Sine Wave

• 200W~3000W true sine wave
• High surge power up to 200%

• 1500W~3000W true sine wave with solar charger & by-pass function
• High surge power up to 200%

• Remote controller for TS-700~3000 , TN-1500~3000

Stand-alone Solar Inverter

• Built-in MPPT solar charger
• High surge power up to 200%
• DC/AC modified sine wave output

DIN Rail Accessories

Mounting Accessories