All Air Inc. - Electronic and Pneumatic Motion Control Products - 1-800-4-AllAir

Tolomatic

Motors & Drives

Tolomatic offers both servo and stepper controllers, drivers and motors, plus integrated servo motor/drive/controller for flexible easy to use integrated servo motion control.

Tolomatic ACS Servo Drive / Servo Controller and Motors

ACS Servo Drive / Servo Controller and Motors

The ACS servo drive creates a low cost, easy-to-use single axis actuator solution.
The ACS is an extremely easy-to-use, low cost servo drive developed specifically for electric actuators. Simply select the configured Tolomatic electric actuators in the drive software to automatically set-up most of the necessary parameters to create motion in the desired linear units (mm or inch). Available with NEMA 23 & 34 servo motors which are pre-tuned in the drive, making the entire servo system very simple to deploy. EtherNet/IP and Modbus TCP options available with dual Ethernet ports for infinite positioning and control from any PLC.

ACS Servo Drive / Controller basic features include:


ACS Stepper Driver, Controller and Motors

The ACS stepper drive creates A low cost, easy-to-use Single Axis actuator solution.
The ACS is an extremely easy-to-use, low-cost stepper drive developed specifically for electric actuators. Simply select the configured Tolomatic electric actuator in the drive software to automatically set-up most of the necessary parameters to create motion in the desired linear units (mm or inch). Available with Nema 11, 17, 23, and 34 size stepper motors with options for gearheads, inline brakes and encoders.

Capabilities of the ACS stepper driver and controller include:


Tolomatic ACSI Basic Integrated Servo Motor/Drive/Controller

ACSI – EtherNet/IP Integrated Servo Motor/Drive/Controller

The ACSI – EtherNet/IP integrated servo motor is a cost effective solution for automating additional axes of motion with EtherNet/IP Industrial Ethernet

The ACSI with an integrated servo motor creates a space-saving machine design by eliminating a drive in a cabinet. The ACSI can be controlled over EtherNet/IP as an I/O device using Add-on-Instructions (AOI) and Add-on-Profiles (AOP). Additionally, digital I/O (24Vdc) and analog I/O (0-10Vdc or 4-20mA) are available as distributed I/O points over EtherNet/IP. Available in both linear and rotary operating modes. With built-in configurations for all of Tolomatic’s electric actuators, the ACSI integrated servo motor/drive/controller creates linear motion quickly and easily in the desired linear units. When ordered with a Tolomatic actuator, the ACSI will be mounted to the actuator, configured and tested as a system.

The ACSI – EtherNet/IP integrated servo motor/drive/controller offers these features:

Basic & Industrial Ethernet protocol options: EtherNet/IP, PROFINET, Modbus TCP


Tolomatic ACSI Basic Integrated Servo Motor/Drive/Controller

ACSI PROFINET Integrated Servo Motor/Drive/Controller

The ACSI – PROFINET integrated servo motor is a cost effective solution for automating additional axes of motion with PROFINET Industrial Ethernet

The ACSI with an integrated servo motor creates a space-saving machine design by eliminating a drive in a cabinet. The ACSI can be controlled over PROFINET as an I/O device. Additionally, digital I/O (24Vdc) and analog I/O (0-10Vdc or 4-20mA) are available as distributed I/O points over PROFINET. Available in both linear and rotary operating modes. With built-in configurations for all of Tolomatic’s electric actuators, the ACSI integrated servo motor/drive/controller creates linear motion quickly and easily in the desired linear units. When ordered with a Tolomatic actuator, the ACSI will be mounted to the actuator, configured and tested as a system.

The ACSI – PROFINET integrated servo motor/drive/controller offers these features:

Basic & Industrial Ethernet protocol options: EtherNet/IP, PROFINET, Modbus TCP


Tolomatic ACSI Basic Integrated Servo Motor/Drive/Controller

ACSI Modbus TCP Integrated Servo Motor/Drive/Controller

The ACSI – Modbus-TCP integrated servo motor is a cost effective solution for automating additional axes of motion with EtherNet/IP Industrial Ethernet

The ACSI with an integrated servo motor creates a space-saving machine design by eliminating a drive in a cabinet. The ACSI can be controlled over Modbus TCP as a slave device. Additionally, digital I/O (24Vdc) and analog I/O (0-10Vdc or 4-20mA) are available as distributed I/O points over Modbus TCP. Available in both linear and rotary operating modes. With built-in configurations for all of Tolomatic’s electric actuators, the ACSI integrated servo motor/drive/controller creates linear motion quickly and easily in the desired linear units. When ordered with a Tolomatic actuator, the ACSI will be mounted to the actuator, configured and tested as a system.

The ACSI – Modbus-TCP integrated servo motor/drive/controller offers these features:

Basic & Industrial Ethernet protocol options: EtherNet/IP, PROFINET, Modbus TCP


Tolomatic ACSI Basic Integrated Servo Motor/Drive/Controller

ACSI Basic Integrated Servo Motor/Drive/Controller

The ACSI integrated servo motor is a cost effective solution for automating additional axes of motion with simple control options via digital I/O or Analog.

The ACSI with an integrated servo motor creates a space-saving machine design by eliminating a drive in a cabinet. The ACSI can be controlled with simple digital I/O (24Vdc), analog input (0-10Vdc or 4-20mA). Available in both linear and rotary operating modes. With built-in configurations for all of Tolomatic’s electric actuators, the ACSI integrated servo motor/drive/controller creates linear motion quickly and easily in the desired linear units. When ordered with a Tolomatic actuator, the ACSI will be mounted to the actuator, configured and tested as a system.

The ACSI integrated servo motor/drive/controller offers these features:

Industrial Ethernet protocol options: EtherNet/IP, PROFINET, Modbus TCP