All Air Inc. - Electronic and Pneumatic Motion Control Products - 1-800-4-AllAir

Speed Control Valve Stainless Steel Tube Fitting Compression Fitting Directional Valve Solenoid Valve Air Actuated Valve Manual Air Valve Air Pressure Regulator Air Cylinder
1 Push In Fitting 2 Metal Fitting 3 Comp. Fitting 4 Solenoid Valve 5 Process Valve 6 Actuated Valve 7 Air Valve 8 Air Regulator 9 Air Cylinder

2V1 & 3V1 Series Solenoid Valve Specifications and Dimensions

Part No.

Unit Price

Valve Picture

Port Size
(NPT)

Voltage  Options

Electrical Entry Options

Port No/ Position/Solenoid

Cv
Flow Rate

Response Time

Power Consumption

Pneumatic Symbo

2V1 1/8

$21.67*

Valve

1/8 NPT

1=12VDC
2=24VDC

2A=24VAC
3=110VAC
4=220VAC
(50/60Hz)

G=Grommet

D= DIN (with LED indicator)

2/2/1
Direct Acting 
Normally closed 
Two Way Valve

S
TACKING

0.23
22 SCFM @100 PSI

< 20 ms

3W for 40PSI

4.8W  for 60 PSI

6.5W  for 115 PSI

Pneumatic Symbol

3V1 1/8

$21.67*

Valve

1/8 NPT

1=12VDC
2=24VDC

2A=24VAC
3=110VAC
4=220VAC
(50/60Hz)

G=Grommet

D= DIN (with LED indicator)

3/2/1
Direct Acting 
Normally closed 
Three Way Valve

S
TACKING

0.1
5 SCFM @100 PSI

< 20 ms

3W for 40PSI

4.8W  for 60 PSI

6.5W  for 115 PSI

Pneumatic Symbol

2V1 & 3V1 Series Valve Specifications 

Port & Mounting

Body Ported, Stackable ( Stacking Hardware Included)

Action & Motion

Direct Acting, Normally Closed, Two Position, 2 to 3 Way

Operating Pressure

28" Hg to 115 PSI (Coil Wattage Dependent)

Working Medium

40 micron filtered air, inert gas & liquid

Maximum Pressure

150 PSI

Operating Temperature

 (-5 to 80 Deg. C)  with non-freezing medium

Coil Insulation & Protection Class

F Class, IP65 (CE Certification)

Coil Duty Cycle

100% ED

Electrical Connection

D = DIN (with LED indicator, conduit terminal)
G = Grommet (12 Lead Wire)

Body Material

Anodized Aluminum

Seal Material

NBR (Buna N)

Lubrication

Not Required

Electrical Coil Connections

For DIN Coil

To connect DIN coil:
1. Remove the Philip screw from the plastic housing and unplug it from the DIN coil.
2. From the screw opening, push the terminal block out from the plastic housing.
3. Note the 1, 2 and ground markings on underside of DIN enclosure.
4. For DC DIN Coil, Connect 1 to Positive, 2 to Negative.
5. For AC DIN Coil, connect 1 to HOT wire, 2 to Neutral wire, and if required connect ground to ground wire.

For Grommet Coil

To connect Grommet coil:
1.  For DC Coil, connect one of the two wires to Positive, and the other wire to Negative.
2. For AC Coil, connect one of the two wires to HOT wire, and the other wire to neutral wire.

Download CAD:     3V1-1/8

  2V1 & 3V1 Series Solenoid Valve Dimensions (UNIT=MM)

Valve Drawing 
Includes Stacking Hardware and seals

 

Valve Drawing